Saturday, June 1, 2013

Glass Etching Tutorial

 Back in the day I posted this fun glass etching project, however it was lacking a step-by-step tutorial guide for you to follow. Now, after more than a year here is the tutorial! My sister was here for the weekend, and we were looking for a "nap-time" craft to do. We ran to the thrift store and found some glass that was just screaming, "etch me!"

My sister picked out this charming set of juice glasses.

IMG_4087.jpg

A blank canvas just waiting for creativity to strike!

IMG_4088.jpg

I chose a bowl. I am slightly obsessed with popcorn especially when there are m&m's involved, so I decided it would be my "popcorn bowl."

IMG_4092.jpg

The supplies you will need are as follows:

IMG_4102.jpg

Something to etch, contact paper, glass etching cream, a foam brush, a craft knife, cutting board, and stencils (if desired).

Decide on your design, and cut it out of contact paper. Remember what you cover will not be etched, what you leave open will.

I decided to put the word "popcorn" on the side of my bowl with a circle around it. So I printed the letters on the computer, then taped them to the contact paper and cut them out with the craft knife. 

IMG_4103.jpg

I forgot to take a picture of the bowl before I put any cream on, but here is one with a little bit of cream on the back. As you can see I put contact paper over the word popcorn, so it will not be etched the area around it will.

IMG_4173.jpg

I used the flower stencil around the rest of the bowl to look like little pieces of popcorn. The background of this picture cracks me up. I'm a messy crafter!

IMG_4170.jpg

After you get all your contact paper placed, liberally apply the cream and let it set for about 30 minutes. The cream bottle said 10 min, but that didn't seem long enough to me. Be careful not to get the cream on you skin or in your eyes and don't eat it. It is acid. 

IMG_4175.jpg

After you let it set, rinse off the cream and remove the contact paper. 

IMG_4179.jpg

The finished product. It was quite hard to photograph since there is design on the front and back of the bowl. Overall I like the bowl. I don't love it. I've never done such a large  section of etching before and I don't think I will again. It looks better in smaller sections. I love the little popcorn pieces, not crazy about the circle around the word popcorn.

IMG_4189.jpg

Here's another angle. Aren't the little popcorns charming.

IMG_4188.jpg

My sister followed the "smaller area" rule and had striking success.

IMG_4196.jpg

She did a different design on each glass.

  IMG_4199.jpg

IMG_4198.jpg

  IMG_4197.jpg

It makes a very cute set of juice glasses. Good job, sis!

IMG_4200.jpg 

While my bowl didn't turn out perfect, I had a fun time crafting with my sis. We had plenty of time to chat while cutting out our designs. My bowl was done before nap time was over, however, since she decided to do 6 glasses, her took a bit longer! I hope this tutorial yields better results for you than it did for me.  That's one of the benefits to being a reader, not a blogger, you can learn from my mistakes. :-)

Tuesday, April 16, 2013

Thrift Store Lamp Revamp

Lamp Revamp 

 This post is about how I took a decrepit old lamp and gave it new life. Kind of like Jesus. I was basically Jesus to this lamp.

IMG_4046.jpg

I found this beauty of a lamp at the Salvation Army for $5. I admit, it is not too much to look at, but I felt that it had a good soul, so I grabbed it a headed home. I stopped by Target on my way to peruse the lamp shade selection hoping for something plain that I could spice up with my mad crafting skills.

I found this shade for only $15:

Plain Lampshade 

But then I saw this beauty on CLEARANCE for only 30 cents more: 

Ikat lampshade 

There is no way that I could craft something for 30 cents! Plus, let's be honest, it probably would not have turned out this beautiful. ;-) So I headed off to the home improvement store to get some spray paint. I came home with these:

IMG_4064.jpgIMG_4065.jpg 

Now that the shopping was done, it was time to get to work. The first step was thoroughly cleaning the crusties off the lamp.  Then I sanded it with very fine grit sand paper (220). 

IMG_4057.jpg 

That picture is totally faked! I don't sand left handed, but I couldn't take the picture left handed either. Maybe I need to hire a professional photographer to follow me around and document my crafting...ha!

When you're done it should have small scratches all over it. Not deep gouges. The small scratches give a rough surface for the paint to adhere to. They will be covered by paint. Deep gouges will show. If you are getting gouges it is because you are using to rough a grit of sandpaper. Use a higher grit (read: higher number). 

IMG_4055.jpg

When you are finished sanding. Wipe it down completely to get all of the dusty bits off. At this point I taped off the top and the cord.To prevent paint from getting on them. Any painters or masking tape will do.

IMG_4060.jpgIMG_4061.jpg

Then it was time to prime. I read that thin even coat are the way to go when spray painting in order to prevent drips. Yes, that is true. No, I am not good at that. I found that I am too excited and anxious to get the painting done. My coats were a little too thick. Luckily I did not get any drips.

First coat of primer:

IMG_4062.jpg

A note on primer. Primer is important especially when painting smooth surfaces like metal. It gives the paint something the stick to. Not sanded or primed, the paint would easily flake off...yucky!

I did two coats of primer. Then in was time for PAINT!

IMG_4066.jpg

Ahhh! Would you just look at that gloss. I love it! I used Rust-oleum Navy Blue in the Gloss finish. I would not recommend gloss finish for everything. It shows every imperfection and dust more easily than satin or flat finish, but in a small amount on something like a lamp, gloss is a show stopper! I then allowed the paint to cure out side for about 48 hours before handling it.

There it is in all her glory. It is actually going to live in the basement, but the lighting down there is abysmal for photographing.

IMG_4094.jpg 

Here's a close up of the paint job. 

IMG_4096.jpg

I LOVE that color! What about you? Have you given any old, dated objects new life  with a coat of paint and a new shade recently? Do share!
Photobucket

Friday, March 1, 2013

Buffalo Chicken Stuffed Peppers

226948_779634191084_1900414272_n

I posted this picture on instagram and Facebook and immediately got requests for the recipe. Unfortunately the recipe I followed was very poorly written (missing multiple steps in the process) and I tweaked it quite a bit. So I decided the best course of action was to write my own recipe and post it here!

Ingredients:
2 Skinless Boneless Chicken Breasts, cooked and shredded
1/2 C. Brown Rice
1/2 C. Celery
1/2 C. Onion 
1 C. Frank's Hot Sauce (You can use another brand, but it won't be as good ;-))
1 1/2 Tsp. Garlic Powder
2 Tsp. Parsley
1/2 C. Blue Cheese
1/4 C. Ranch Dressing
6 Slices  Muenster Cheese (Provolone, Swiss, or Pepper Jack would also be good).
3 Whole Bell Peppers

Directions:
Preheat the oven to 350 degrees. Cook the rice according to the package directions. Saute the onions and celery until soft. Add all the other ingredients except the blue cheese, muenster, and bell peppers. Simmer for 15 min. Add the blue cheese and ranch. Cut the stems off the peppers and clean out the seeds. Lay a slice of cheese in the bottom of each pepper. Fill the peppers with the meat mixture until heaping. Place in a baking dish and bake for 30 min. Place another piece of cheese on the top and cook for an additional 5-10 min. Until the cheese is melted and the peppers are soft. 


If you like Buffalo chicken, you should check out my Buffalo Chicken Calzone recipe. It is yummy and quick.

Love,
Natalie

Tuesday, January 22, 2013

Felt Baby Blocks

Well folks I entered the wild world of sewing when this beauty showed up for Christmas from Mama Mayhem.

IMG_3141.jpg

I did have a sewing machine prior to that that I had picked up at a garage sale for $15. It was SUPER old. It came with a servicing receipt  from 1963! My old machine was persnickety and more frustrating than fun to use. I did bust it out from time to time. For example, I used it to make the roman shades in our bathroom revamp. Most recently I had tried to use it to make this pillow, but I got so frustrated with my machine being crappy that I ended up sewing it by hand--not fun.

Enter my new shiny flashy machine. I love it. And I love my new baby. So I decided by first project would be something for my babe.

IMG_3181.jpg

There they are together. I love it how it looks like Max is winking!

It is a fairly simple process. I used felt fabric in three different patterns, but I think more patterns would have been more fun. The foam I got was 3" thick so my blocks are 3" square.

IMG_3157.jpg

I cut the fabric in 3 1/2" squares to allow for 1/4" seams.

IMG_3139.jpg

If you don't have  a rotary cutter, go buy one now. You will love yourself for it. And sorry for the wonky focus of this photo I was trying out Mr. Mayhem's new 50mm prime lens. I don't quite have the technique down yet.

Once you have all your squares cut, sew two of them right sides together.

IMG_3144.jpg

You end up with this.

IMG_3145.jpg

Continue in that fashion until you have four in a row (you need 6 total for each block).

IMG_3146.jpg

Again with the 50mm lens...sorry. Now, sew one square on each side to make it look like a "T". Remember to keep right sides together.

IMG_3149.jpg

At this point you are going to start making the cube. Keep sewing right sides together until you end up with this.

IMG_3150.jpg

Sew two more sides, but be sure to leave one open to get the foam into. I did sew a little ways on both sides on the machine to get nice corners, but I left a 2 1/2" gap in the middle to stuff the foam through.

IMG_3151.jpg

Turn the block right side out! They already look cute.

IMG_3153.jpg

 Now it is time to cut the foam. I have been told that the best way to cut it is with an electric knife. I don't have one, so I had to improvise. I used the most fine tooth saw blade I could find from Mr. Mayhem's hacksaw. It worked like a charm. If it is just a serrated knife the foam will be cut jagged and the blocks won't be perfectly square.

IMG_3161.jpg

I drew a line at 3" on both sides then Mr. Mayhem and I each took an end of the saw blade and pulled it back and forth slowly making sure it was lined up the whole time. I felt like I was cutting down a tree in the olden days. I even said "Timber!" in my head each time we reached the end of the foam.

I stuffed the foam in the felt and hand stiched them shut. I don't have pictures of the last two steps. Bad blogger...

Here is the finished product.

IMG_3177.jpg

Max is a little too young to interact with them too much, but he seems interested and I'm sure as he gets older he will have lots of fun with them!

IMG_3195.jpg

This was a great project to break in my new sewing machine. It was quick, easy, turned out cute, and it was pretty cheap too. I got the foam at hobby lobby with a 40% off coupon for $3.50 and the fabric was 60% off at JoAnn so my total there was $3.19. All in all I would call it a success.

Love,
Natalie

Saturday, December 1, 2012

Baby Mayhem has arrived!

Maximus Ryan
November 11, 2012
7lbs 9.9oz 20in
 

Looks like we finished up the nursery just in time. Two days after I posted the nursery reveal Max was born! It was 5 days before his due date. We were really surprised because I had it in my head that as a first time mom I was sure to go over due. Mr. Mayhem had a HUGE project going at work on the day of Max's birth. Luckily he had some great people who he had trained that could cover for him, so he didn't miss a thing. Before I went into labor we both joked, "the 11th would be the worst day for the baby to be born." Oops! Also it seems that my nesting takes a different form than most women. On the day I went into labor I was outside cleaning up all my flower beds for the winter. I guess instead of cleaning and organizing inside the house, I felt the need to get the yard ready for the little one. 

I started having contractions the night of the 10th around 10:30. We went to the hospital a little after midnight and I got my epidural around 2am. The nurses said that I should be pushing by 8am and have him by lunch. Things did not progress that way and after 20 hours of labor, the doctor suggested a C-section for three reasons: 1) he was face up and she couldn't turn him 2) he was crooked 3) he has a large head. The c-section went well, and we met our little boy at 7:06PM on the 11th. We are both in love, but healing from a c-section has not been much fun. I'll be back soon with more pictures of my favorite baby!

Love,
Natalie

Friday, November 9, 2012

Minion Nursery Complete!

Well folks, with just one week to D-day (AKA My due date) the count down is nearing completion. Luckily for me the nursery project has already  been completed. Mr. Mayhem and I had fun using our new camera (our biggest baby splurge!) to take some nice photos of our hard work. 

We are so happy with how everything came together. It really puts a new mama's heart at ease to know that she has a safe, calming, and comfortable place to bring her newborn home to. 

This first photo is the view as you come in the door. The crib is to the right and the closet is to the left. 


Mr. Mayhem decided that the baby and I needed to be included in the photo shoot. I think this angle gives a good idea of the layout of the room. Remember this first nursery post where I was hell bent on changing the rug? Surprise...it ended up working, and I love it in the space. Amazing how things just work out some times.


Here is the view of the other side of the room. His bed looks so empty, but from what I have read that is the safest way for baby to sleep.  That bear on the crib makes heart beat sounds to sooth the little guy to sleep with reminiscent sounds of the womb.


We opted for a mesh bumper because we have heard concerns about babies being suffocated by the regular kind! I love the crisp white look too. It keeps it simple.


 Let's take a look at some more of the details!  You might remember this little minion from this post and the growth chart ruler from this post! They both add so much fun and interest to the space.


Mr. Mayhem built these shelves from corbels we bought at the home improvement store and some wood we found in the basement left from the previous owners. They turned out great especially considering their humble beginnings. 


Baby Mayhem's first photo got framed and put on the shelf with a little minion friend. My mom bought that minion for us not realizing that it was a Dracula minion with a cape and FANGS! I cut off the cape, but those fangs are still there and crack me up. My mom was so embarrassed when she realized in was a vampire.


We are especially excited about our new rocker glider that we got as a gift (we are so thankful for all the generous people around us!). It is so comfy and will be great to rock the little one in.  Mr. Mayhem built those book shelves on the wall as well. They are knock offs of these Ikea picture ledges. The pillow I sewed, and then Mr. Mayhem and I used this method to paint on the minions.


Like I said, the nursery is done, but that doesn't mean I don't have more ideas for the future. I think once the baby is born and we have announced his name, I will buy the letters to spell it out and intersperse them with these minions on the top shelf.  I may paint them or decoupage them with cute craft paper. You will just have to wait and see! I love the little bit of the cornice box that you can see in this picture!


Now all it needs is a baby! I will let you know when that addition happens. Any day now!